Epifanes Epoxy Finishing Filler 750gr

Description

Epifanes Epoxy Filler Fine is a strong, two-component epoxy-based filler, ideal for use with epoxy resins. It offers a smooth surface and excellent waterproofing due to its non-porous formulation. Suitable for use on GRP, steel, wood, and aluminum. When applied over epoxy resins, an appropriate primer must be used beforehand.

This is a high-strength two-component finishing filler based on epoxy resins. Extremely fine and non-shrinking, it provides an ultra-smooth surface. Apply in thin layers only (maximum 1 mm). Before use, mix each component separately and then combine thoroughly until the color is uniform. Do not use below 60°F/12°C. The best sanding properties are achieved between 24 and 48 hours after application.

Recommended Use:
Fiberglass – Steel – Wood – Aluminum: Fine epoxy finishing filler for use over Epifanes Epoxy Filler 1500 in two-component paint systems both above and, if required, below the waterline. If overcoating above the waterline with a one-component finish, first apply a layer of Epifanes Poly-urethane Yacht Coating or Poly-urethane Primer.

SPECIFICATIONS

• Pot Life After Mixing: 15–40 minutes depending on temperature and volume

• Mixing Ratio:

  • By volume: 100 : 50

  • By weight: 100 : 50

• Sandable: After 24 hours at 65°F / 18°C

• Color: Grey